Eq Settings - Sony 3-875-814-11(1) Operating Instructions Manual

Sony multi channel av receiver operating instructions
Table of Contents

Advertisement

Enhanced Sur Mode
You can select the decoding mode for the
sound field.
For details on the decoding modes available,
see "Setting a multi-channel surround sound
effect" (page 80).
x PLII
Performs Dolby Pro Logic II decoding. A
source recorded in 2 channel format is
decoded into 5.1 channels.
x PLIIx
Performs Dolby Pro Logic IIx decoding. A
source recorded in 2 channel or 5.1 channel
format is decoded into 7.1 channels.
x Neo:6 Cinema
Performs DTS Neo:6 Cinema mode decoding.
A source recorded in 2 channel format is
decoded into 7 channels.
x Neo:6 Music
Performs DTS Neo:6 Music mode decoding.
A source recorded in 2 channel format is
decoded into 7 channels. This setting is ideal
for normal stereo sources such as CDs.
x NEURAL-THX
Next generation of Neural-THX
addition to stereo enhancement processing and
pure discrete 5.1 surround sound, now capable
of full 360° 7.1 surround sound playback from
®
Neural-THX
surround encoded content.
Note
You can select "PLII" when there is no surround
back speaker on the Speaker Pattern menu, or you
can select "PLIIx" when there is a surround back
speaker. You cannot select both settings at the same
time.
You can use following parameters to adjust the
tonal quality (bass/treble level) of front, center
and surround back speakers.
Notes
• This function does not work in the following cases.
– The multi-channel input is selected.
– Sound Field is set to "2ch Analog Direct."
• This function does not work when Dolby TrueHD
signals with a sampling frequency of higher than
96 kHz are being received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
higher than 96 kHz, the signals will always be
played back at either 44.1 kHz or 48 kHz.
To adjust the equalizer on the
EQ screen
1
®
Surround. In
2
3

EQ settings

Bass
Level
(dB)
Frequency
(Hz)
Press B/b to select the speaker on the
screen you want to adjust, then press
.
Press B/b to select "Bass" or "Treble."
Press V/v to adjust the gain, then press
.
Treble
119
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-da6400es

Table of Contents