Table of Contents
Advertisement
Menu
Item
HDMI Settings
CTRL FOR HDMI [xxx]
AUDIO OUT [xxxxxx]
SW LEVEL [xxxdB]
H.A.T.S. [xxx]*
VIDEO DIRECT [xxx]
System Settings NAME IN ? [xxxxxxxx]
PARTY SETUP [xxxxxxx] ZONE2/3, ZONE2, ZONE3
12V TRIG. MAIN [xxxxx]
12V TRIG. ZONE2 [xxxxx]
12V TRIG. ZONE3 [xxxxx]
RS-232C CONTROL [xxx]
SERVER [xxx]
VERSION [x.xxx]
* To activate the H.A.T.S. function, select "ON" for "CTRL FOR HDMI."
To change the display
You can check the sound field, etc., by
changing the information on the display.
1
Press AMP.
The receiver can be operated using the
remote.
2
Select the input for which you want to
check the information.
3
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
Parameter
OFF, ON
TV+AMP, AMP
AUTO, +10dB, 0dB
OFF, ON
OFF, ON
OFF, CTRL, ZONE, INPUT
OFF, CTRL, ZONE, MAIN
OFF, CTRL, ZONE, MAIN
OFF, ON
OFF, ON
–
When tuning in a channel from a satellite
tuner
Channel name t Channel number t
Category t Artist name t Song title t
Composer name (SIRIUS only) t Signal
strength t Sound field type
Initial
setting
OFF
AMP
AUTO
ON
OFF
ZONE2/3
OFF
OFF
OFF
ON
OFF
–
133
GB
Advertisement
Table of Contents
