Switching the command mode of
the main remote commander
Press ?/1 while pressing RM
The AMP and ZONE buttons flash.
The ZONE button goes off, the AMP
button keeps flashing and the SHIFT
button lights up.
Press the numeric button 1 or 2
while the AMP button is
When you press 1, the command mode is
set to AV SYSTEM 1. When you press 2,
the command mode is set to AV SYSTEM
The AMP button lights up.
The AMP button flashes twice, then the
command mode setting process is
Using a bi-amplifier
If you are not using surround back speakers,
you can use the SURROUND BACK
SPEAKERS terminals for the front speakers
for use with a bi-amplifier connection.
To connect speakers
Connect the jacks on the Lo (or Hi) side of the
front speakers to the FRONT SPEAKERS A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SURROUND BACK SPEAKERS terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
To set up speakers
The receiver can be operated using the
The menu is displayed on the TV screen.