Operating the receiver
from another zone
(ZONE 2/ZONE 3 operations)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
Operating the receiver from
Turn on the main receiver (this
In the case of illustration 1-2
(page 89), turn on the amplifier
in zone 2.
The remote switches to zone 2.
The zone function is activated.
The menu is displayed on the TV screen.
Press V/v to select "
Press V/v to select the input
source you want, then press
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
Adjust to a suitable volume.
• In the case of illustration 1-1
(page 89), adjust the volume using
MASTER VOL +/– on the remote.
• In the case of illustration 1-2
(page 89), adjust the volume using the
receiver in zone 2.
To finish the zone 2 operation
Press ?/1 after pressing ZONE.