To the VIDEO 2 IN/
PORTABLE AV IN jacks
C Audio/video cord (not supplied)
Function for conversion of video signals
This receiver is equipped with a function for converting video signals.
• Composite video signals can be output as HDMI video and component video signals.
• Component video signals can be output as HDMI video and video signals.
As the initial setting, video signals input from the connected component are output to the HDMI
OUT or MONITOR OUT jacks as shown in the table below.
We recommend you set the video conversion function to match the resolution of the monitor you
For details on the video converting function, see "
HDMI IN 1/2/3/4/5/6
COMPONENT VIDEO IN
a : Video signals are output.
– : Video signals are not output.
Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
HDMI OUT A B
Video settings" (page 123).
MONITOR VIDEO OUT