Settings For The Eq (Eq Menu); Settings For The Audio (Audio Settings Menu) - Sony STR-DN1000 Operating Instructions Manual

Settings for the EQ
(EQ menu)
You can use the following parameters to adjust
the tonal quality (bass/trebel level) of front
speakers.
Bass
Level
(dB)
Frequency
(Hz)
Notes
• This function does not work in the following cases.
– Sound Field is set to "Analog Direct".
– PCM signals with a sampling frequency of more
than 96 kHz are being received.
– Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
more than 96 kHz, the signals will always be
played back at 96 kHz.
To adjust the equalizer on the
EQ screen
1
Press B/b repeatedly to select "Bass"
or "Treble".
2
Press V/v repeatedly to adjust the gain,
then press .
Settings for the audio
(Audio Settings menu)
You can make settings for the audio to suit
your preference.
Audio Settings menu parameters
Treble
x A/V Sync (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust the delay from 0 ms to
300 ms in 10 ms steps.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is not valid when "Analog Direct"
is being used.
x Dual Mono (Digital broadcast
language selection)
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• Main/Sub
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• Main
Sound of the main language will be output.
• Sub
Sound of the sub language will be output.
continued
71 GB