Table of Contents
Advertisement
• The measurement result is not utilized in the
following cases.
–The multi-channel input is selected.
–"2ch Analog Direct" is being used.
• The measurement result is not utilized when
Dolby TrueHD signals with a sampling
frequency of higher than 96 kHz are being
received.
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
50
GB
3
Press V/v repeatedly to select
"
b.
The Settings menu list appears on the TV
screen.
AMP
4
Press V/v repeatedly to select
"Auto Calibration," then press
V/v/B/b,
MENU
5
Press V/v repeatedly to select
"Quick Setup," then press
The screen on which you can select the
item to be measured appears.
Settings," then press
or b.
or
.
Advertisement
Table of Contents
