Makes the required settings for components
connected to the HDMI jacks.
Control for HDMI
Lets you turn the function which controls
components connected to the HDMI jack
using an HDMI cable on or off.
When you set "Control for HDMI" to "ON," "Audio
Out" may be changed automatically.
Audio Out (Setting HDMI audio
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
The sound is output from TV's speaker and the
speakers connected to the receiver.
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling frequency,
etc. When the TV has stereo speakers, the sound
output from the receiver is also stereo as that of the
TV, even if you play multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
• When you select the input that you have assigned
the HDMI input, sound does not output from the
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Audio signals are not output from the TV's speakers
when "Audio Out" is set to "AMP."
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
x 0 dB
Automatically sets the level to 0 dB or +10 dB
depending on the frequency.
x +10 dB
Lets you turn the H.A.T.S. (High quality
digital Audio Transmission System) function
on or off. When the H.A.T.S. function is turned
on, the sound quality is enhanced because
there is no jitter (timing gaps when reading
signals) when transmitting digital audio
To activate the H.A.T.S. function, select "ON"
for "CTRL FOR HDMI."