Listening to FM/AM radio
Refer to "Using Network Features"
supplied with these operating
instructions for details on listening to the
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
The tuning scale for direct tuning is shown below.
• FM band
• AM band 10 kHz*
* The AM tuning scale can be changed (page 66).
Tuning into a station
automatically (Auto Tuning)
The receiver can be operated using the
The menu is displayed on the TV screen.
Press V/v repeatedly to select
The FM or AM menu list appears on the
Press V/v to select "Auto
Tuning," then press
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 66), or select the preset station
you want (page 67).
The option menu appears.
Press V/v to select "FM Mode," then
Press V/v to select "MONO," then
FM" or "
AM," then press