Tuning
Listening to FM/AM radio
Refer to "Using Network Features"
supplied with these operating
instructions for details on listening to the
Internet radio.
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 42).
Tip
The tuning scale for direct tuning is shown below.
FM band
50 kHz
AM band
9 kHz
SHIFT
Numeric
buttons
64
GB
Tuning into a station
automatically (Auto Tuning)
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
"
The FM or AM menu list appears on the
TV screen.
4
Press V/v to select "Auto
Tuning," then press
5
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
AMP
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 65), or select the preset station
you want (page 67).
2
Press OPTIONS.
The option menu appears.
3
Press V/v to select "FM Mode," then
V/v/b,
press
4
Press V/v to select "MONO," then
OPTIONS
press
MENU
FM" or "
AM," then press
or b.
.
.
.