Press the buttons you want to
program in the same sequence
as you want the operation(s) to
N, x, X,
button for more
than 1 second
MACRO 1 or
The input button selected in step 2 flashes
twice, then lights up again.
Repeat steps 2 and 3 when you
want to program operations for
Press RM SET UP to finish the
If the RM SET UP button flashes five times in
step 1, and the macro programming process
does not start, replace the batteries with new
To cancel programming
Press RM SET UP. Also, not pressing any
button for 60 seconds cancels the settings.
The previous command remains valid.
Operations to be
Performs the operation
of the button.
Make a one second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
Starting macro play
The AMP button lights up, and then turns
Press MACRO 1 or MACRO 2 to
start the macro.
The macro starts and execute the
commands in the order you assigned
them. While the commands are being
sent, the AMP button flashes and the RM
SET UP button lights up. When the
commands have been sent, the RM SET
UP and AMP buttons turn off.
To erase a programmed macro
Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes.
Press RM SET UP.
Settings stored as macro are cleared.