Sony 3-875-814-21(1) Operating Instructions Manual page 71

Sony multi channel av receiver operating instructions
Table of Contents

Advertisement

Notes
• This function does not work when the multi-
channel input is selected.
• This function does not work when DTS-HD signals
with a sampling frequency of higher than 48 kHz
are being received.
• This function does not work when Dolby TrueHD
signals with a sampling frequency of higher than
96 kHz are being received.
• If you set up the sound field effect while the
receiver is receiving signals with a sampling
frequency of higher than 48 kHz, the signals will
always be played back at either 44.1 kHz or
48 kHz.
• If you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• The beginning of the sound stream may be dropped
out when Neural-THX processing is turned on or
off.
Tips
• We usually recommend "A.F.D. Auto."
• You can identify the encoding format of DVD
software, etc., by looking at the logo on the
package.
• Dolby Pro Logic IIx decoding is effective, when
2 channel or 5.1 channel signals are input.
• Neural-THX is effective when 2 channel or
5.1 channel signals are input.
71
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-da6400es

Table of Contents