Table of Contents
Advertisement
EiUtaliave lam at-(ellom =Jaer-\eler-t-yt>
Selecting the AM Tuning Interval
3 Click on FREQ - or +.
The AM tuning interval is preset to 10 kHz. When using the
The tuner begins scanning for radio stations in the
receiver where the frequency allocation system is based on a
respective direction, then stops when it finds a strong
9 kHz interval, make the following adjustments.
station. Click on either button to continue scanning.
NE
INCTION
1 Turn on the power and tune in any AM station.
2 Turn off the power.
3 Press the POWER button while holding down the
PRESET TUNING + button on the front panel of the unit.
To change the AM tuning interval back to 10 kHz, repeat
the above steps.
Note
When the interval is changed, all preset stations are erased.
After changing the interval, be sure to preset the stations
again (see "Presetting Stations" on page 22).
Click on BAND to switch between FM and AM.
Automatic Funin
To show the tuner control panel without the preset
station menu
Click on EXIT. The REC EDIT, CUSTOM and LIST buttons
appear at this time. To return to the preset station menu with
the tuner control panel, click on LIST.
Follow the procedure below to tune in radio stations.
1 Click on FUNCTION in the main menu.
Note
The SUNG TION maby appears.
When listening to an AM station, keep the AM loop antenna
away from the TV set to prevent noise pickup.
2 Click on TUNER.
The preset station menu and the tuner control panel
appear.
FUNCTION
To return to the main menu, click on EXIT.
Advertisement
Table of Contents
