Table of Contents
Advertisement
Menu
Item
System Settings NAME IN ? [xxxxxxxx]
PARTY SETUP [xxxxxxx] ZONE2/3, ZONE2, ZONE3
12V TRIG. MAIN [xxxxx]
12V TRIG. ZONE2 [xxxxx]
12V TRIG. ZONE3 [xxxxx]
RS-232C CONTROL [xxx]
SERVER [xxx]
VERSION [x.xxx]
* To activate the H.A.T.S. function, select "ON" for "CTRL FOR HDMI."
To change the display
You can check the sound field, etc., by
changing the information on the display.
1
Press AMP.
The receiver can be operated using the
remote.
2
Select the input for which you want to
check the information.
3
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When receiving RDS broadcasts
PS (Program Service name)
Band, or Preset number t Frequency,
band and preset number t PTY (Program
b)
t RT (Radio Text)
Type) indication
c)
t Sound field type
indication
Parameter
OFF, CTRL, ZONE, INPUT
OFF, CTRL, ZONE, MAIN
OFF, CTRL, ZONE, MAIN
OFF, ON
OFF, ON
–
a)
, Preset name,
a)This information also appears for non-RDS
FM stations.
b)Type of program being broadcast
c)Text messages sent by the RDS station.
Initial
setting
ZONE2/3
OFF
OFF
OFF
ON
OFF
–
121
GB
Advertisement
Table of Contents
