Preset Station Tuning - Sony ICF-SW77 Service Manual

Lw/mw/sw/fm stereo pll synthesized receiver
Hide thumbs Also See for ICF-SW77:
Table of Contents

Advertisement

Preset Station Tuning
Once the frequencies of the stations has been saved, you can
tune in these stations easily by using Preset Station Tuning,
The saved station can be tuned in by selecting the "Station
Name" on each "Preset Page ' Each Preset Page can hold up
to 5 Stations Names
There are three Kinds of "Preset Pages" in Preset Station
Tuning:
- Tuning Pages (1 to 20)
• Quick Pages <Q1 and Q2)
• Timer Page (TP)
How to Tune in by Selecting a Preset
Station Name
The Tuning Pages (1 to 20) can hold up to 20 Pages, with 5
Station Names on each Page, therefore 100 Station Names in
total. One Station Name can hold up to 10 "Frequencies'' (see
page 15). but in total, 162 Frequencies can be memorized on
the Tuning Pages. When you select a Station Name, one of
the 10 "Frequencies" is tuned in. The Station Names are
displayed in capital letters; e g "ABC".
The Quick Pages (Q1 and Q2) can hold 2 Pages, with 5
Station Names or 5 frequency numbers on each Page,
therefore 10 stations in total.
Quick Pages appear to be very similar to Tuning Pages, but
since there are only 2 Pages, you can tune in a station more
quickly. Quick Page can memorize a Station Name that you
saved on the Tuning Page or any frequency that you tune in
Another difference is that the stations on Quick Pages are
memorized by overwriting onto the previously memorized
station. (See page 23 for details.) Quick Page is also suitable
for temporary use, as a memorandum of a frequency number.
The Station Names are displayed in smalt letters; e.g. "abc."
The Timer Page (TP) has one Page, therefore 5 Station
Names in total. Each Station Name on the Timer Page has
only 1 "Frequency." Timer Page can be used to memorize
stations for timer operation (turning on and off of the radio at a
specified time). The Station Names are displayed in capital
letters; e.g. "ABC".
Several stations on the Tuning Page are already preset in this
unit at the factory. Therefore, you can tune in a Preset Station
by following the instructions on the right before memorizing
stations of your own choice. To memorize the stations, go on
to the next section to learn how to tune in a station by direct,
manual or scan tuning and read the section "Memorizing and
Editing Stations" section from page 21._
Notes
* The stations on the Quick Page and the Timer Page are not preset at the
factory. Read the section from page 21 and save the stations you want for
more details.
• Refer lo the supplied "Wave Handbook" for details about the factory preset
stations.
To receive a preset station on a Tuning Page
1 Set POWER/LOCK to POWER.
2 Press ON/OFF
The indications on the frequency display appear.
3 Press PAGE FEED + flor-Dto select the desired Page
number (from 1 to 20)*.
Each time you press + or
the page number changes.
«.
33 iS.O
.«,
ri
rTTITTTTTn
BBC
J
*9660
j
MSB
]
NHK
|
tl 5070 [|< 0
]
1
Page number
4 Select the the desired station from the 5 Station Names on
the Station selection line, and press the Station Number
button (Si, S2, S3, S4, or S5) for that Station Name.
12
The selected station is tuned in and the Station Name appears
on the display
To select a Frequency, refer to page 15
1 Set POWER/LOCK to POWER.
2 Press ON/OFF.
The indications on the frequency display appear.
3 Press QUICK PAGE to select the desired Quick Page, Ql
or Q2.
Each time you press it, the Page number changes as
follows:
Ql -> Q2
Tuning Page
t__J
'Note on the Page number
When you memorize Station Names on all the 20 Tuning
Pages, all the Page numbers are shown when you press the
PAGE FEED buttons. Otherwise, not all the Tuning Pages
are displayed.
The Page that has no Station Names is called a "Blank Page "
When you select from the Tuning Pages, only the numbers for
Pages with preset stations and one "Blank Page" number
(with the smallest Page number) is displayed. The other
Blank pages will not be displayed.
Only the first "Blank Page" number is displayed so that you
can save a new Station Name on that page
Example: When Pages 1 to 10 are "Blank Pages " and Pages
11 to 20 have Preset Station Names, only Page Numbers 1
and 11 to 20 are displayed when you press the PAGE FEED
buttons.
Flowever, during the Program Time Mode when memorizing
stations (see page 22). all the 20 Pages are displayed when
you press the PAGE FEED buttons.
I - ..\
■ :
Liiimnu
KVVTVJ
ne.s | nhk
nth
bbc
Page number
4 Select the the desired station from the 5 Station Names (or
frequencies) on the Station selection line, and press the
Station Number button (Si. S2, S3, S4, or $5) for that
station.
13
To receive a preset station on a Quick Page

Advertisement

Table of Contents
loading

Table of Contents