Switching Between Digital And Analog Audio - Sony 3-875-814-21(1) Operating Instructions Manual

Sony multi channel av receiver operating instructions
Table of Contents

Advertisement

Switching between
digital and analog audio
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
INPUT MODE
1
Select the input source using
INPUT SELECTOR on the
receiver.
2
Press INPUT MODE on the
receicver.
The selected audio input mode appears on
the TV screen.
• Auto
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
• Analog
Specifies the analog audio signals input
to the AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When either HDMI input, or DIGITAL MEDIA
PORT adapter is selected, "------" appears on the
display, and you cannot select other modes. Select
an input mode other than the HDMI input, and
DIGITAL MEDIA PORT adapter then set the
audio input mode.
90
GB
INPUT SELECTOR
• When "2ch Analog Direct" is being used, or the
multi-channel input is selected, audio input is set to
"Analog." You cannot select other modes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-da6400es

Table of Contents