Quick Click Settings; System Settings - Sony 3-875-814-21(1) Operating Instructions Manual

Quick Click settings

Controls components connected to the receiver
using the on-screen remote.
Source Component
Selects the source component that is to be
operated.
x Preset Mode
Customizes the remote to match the source
components connected to your receiver.
x Learn Mode
Allows the remote learn codes.
x Reset
Resets both programmed codes and learned
codes.
Common Component
Selects the common component such as a TV,
projector or lights that is to be operated.
x Preset Mode
Customizes the remote to match the common
components such as the TV, the projector and
the lightings connected to your receiver.
x Learn Mode
Allows the remote to learn codes.
x Reset
Resets both programmed codes and learned
codes.
Macro Setup
Sets several commands in a sequential order as
a single command.
116
GB

System settings

Customizes the settings of the receiver.
Screen Saver
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
x OFF
The screen saver function is disabled.
x ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
RS-232C Control
Lets you use this menu for the zone 2/zone 3
operation.
x OFF
x ON
Language
Selects the language for the messages on the
screen.
x English
x Español
x Français
x Deutsch
System Update
Lets you upgrade the firmware of the receiver.
Refer to "Using Network Features" supplied
with these operating instructions for details.