FUEL FEEDING HYDRAULIC CIRCUIT DIAGRAM FOR ONE OR MORE BURNERS
1
Main tank
2
Filter
3
Circulation pump
4
System and water outlet
5
Air/gas outlet - normally closed
6
Fuel recovery tank and degasser
7
Non-return valve
8 By-pass (normally closed)
9
Pressure regulator that can be set
0.2- 1 bar
10
Pressure gauge (0-4 bar)
HYDRAULIC DIAGRAM OF SUPPLY FOR ONE OR MORE BURNERS
WITH MAXIMUM NOMINAL VISCOSITY (5°E AT 50 °C)
1
Main tank
2
Filter
3
Circulation pump
4
System and water outlet
5
Air/gas outlet - normally closed
6
Fuel recovery tank and degasser
7
Non-return valve
8 By-pass (normally closed)
The combustible recovery and degasifier tanks (diameter ~ 150, height ~
400) should be installed as near as possible to the burner and should be
about 0,5 m. higher with respect to the burner's pump.
The combustible recovery and degasifier tanks (diameter ~ 150, height ~
400) should be installed as near as possible to the burner and should be
about 0,5 m. higher with respect to the burner's pump.
10 / 32
98320_201302