Table of Contents
Advertisement
30
Eco mode (energy saving mode)
INFO
Allocation of relay switch output
Allocation of relay switch output
or power output
Salt electrolysis control can only be activated if you
Salt electrolysis control can only be activated if
have allocated a relay switch output or a power output
have allocated a relay switch output or a power output
to it beforehand, depending on operating mode.
to it beforehand, depending on operating mode.
INFO
Pulse interval dependency
on dosing output
When using control impulses, the interval between two
sequential pulses varies depending on the current
sequential pulses varies depending on the
dosing output. At 100% dosing output, the interval will
dosing output. At 100% dosing output, the interval will
correspond to the operating cycle entered. For lower
correspond to the operating cycle entered. For lower
dosing outputs, the interval is expanded accordingly;
dosing outputs, the interval is expanded accordingly;
e.g. for 50% dosing output, the interval is doubled.
e.g. for 50% dosing output, the interval is doubled.
INFO
Current
Current
on dosing output
When controling via a power output 0/4
ing via a power output 0/4-20mA, the
current emitted is interpolated between the minimum
current emitted is interpolated between the minimum
and maximum values indicated based on the current
and maximum values indicated based on the current
dosing output.
INFO
Plug-in module PM5-SA4 needed
To control the salt electrolysis sys
the salt electrolysis system via a power
output 0/4-20mA, the following optional plug
20mA, the following optional plug-in module
is needed:
PM5-SA4 CONVERTER 0/4-20MA (Art. no. 127011)
29.2
Electrical connection
Requisite user qualification:
ELECTRICAL SPECIALIST
Electrical connection of the solar control system may
Electrical connection of the solar control system may
only be performed by an ELECTRICAL SPECIALIST as
only be performed by an ELECTRICAL SPECIALIST as
defined in the chapter User qualification.
IMPORTANT NOTICE!
Observe maximum flows
Observe the maximum permissible currents for each
Observe the maximum permissible currents for each
individual relay switch output (max. 4A) and for the sum
switch output (max. 4A) and for the sum
of all relay switch outputs being used in 230V~ (in sum,
of all relay switch outputs being used in 230V~ (in sum,
max. 4A)
Please also refer to the Chapter
Please also refer to the Chapter 230V~ Power supply.
For the operating mode Control pulses, a relay switch output is
operated as a potential free switch and is linked with the salt
electrolysis system's corresponding control input. Please use the
electrolysis system's corresponding control input. Please use the
corresponding connection diagram in the section Universal switch
corresponding connection diagram in the section
outputs
Connection options
potential free control input.
For the operating mode Power output 0/4-20mA
optional plug-in module PM5-SA4 is connected with the corresponding
SA4 is connected with the corresponding
salt electrolysis system power input. For more details, please refer to
salt electrolysis system power input. For more details, please refer to
the separate documentation for the power outputs 0/4-20mA.
the separate documentation for the power outputs
30
Eco mode (energy saving mode)
Eco mode (energy saving mode)
The function eco mode (energy saving mode) facilitates automatic,
The function eco mode (energy saving mode) facilitates automatic,
timed toggling of the pool from normal mode into an energy
timed toggling of the pool from normal mode into an energy-saving
operating mode. The two operating modes are designated as follows:
operating mode. The two operating modes are designated as follows:
Normal mode (normal pool operation)
•
impulses, the interval between two
dependency
dependency
SA4 needed
20MA (Art. no. 127011)
User qualification.
, a relay switch output is
witch and is linked with the salt
Connecting a device with the
Connecting a device with the
20mA, a power outlet on the
User Manual PoolManager
Eco mode (energy-saving operation)
saving operation)
•
Actual execution of the two operating modes can be realised in a very
Actual execution of the two operating modes can be realised in a very
flexible manner.
Example (for polls with over overflow gutter):
Example (for polls with over overflow gutter):
Normal mode
Circulation via the overflow gutter
Circulation via the overflow gutter
•
Eco mode Circulation via the floor drain
Circulation via the floor drain
•
(reduction of thermal loss)
Toggling the water circuits for both operating modes can be
Toggling the water circuits for both operating modes can be
•
realised with, for example, stem valves.
realised with, for example, stem valves.
The function eco mode provides the following options:
The function eco mode provides the following options:
Multiple flexibly programmable timers
Multiple flexibly programmable timers
•
Flexible allocation of relay switch outputs for the two operating
exible allocation of relay switch outputs for the two operating
•
modes
Operation of relay switch outputs optionally as potential free
Operation of relay switch outputs optionally as potential free
•
switch or as 230V~-output
Link with an external switch or push button for toggling the
Link with an external switch or
•
operating mode
The two relay outputs for this function are connected as follows for the
for this function are connected as follows for the
respective operating mode:
Operating mode
Status of the allocated relay switch outputs
Status of the allocated relay switch outputs
(Normal operation)
Relay output 'normal mode'
Relay output 'normal mode'
Rely output 'eco mode'
Rely output 'eco mode'
Eco mode
Relay output 'normal mode'
output 'normal mode'
(Energy saving mode)
Rely output 'eco mode'
Rely output 'eco mode'
30.1
Menu Eco mode
The configuration menu for Eco mode
Eco mode is called up with the following
icon:
Eco mode
The following settings are available:
The following settings are available:
Menu Eco mode
• Inactive (Eco mode not used)
Inactive (Eco mode not used)
Operating mode
• Normal mode
• Eco mode
• Time switch
(Automatically timed toggling between operating
(Automatically timed toggling between operating
modes)
Programmable timer
Programming timers.
Basic configuration
Basic settings for solar control.
Safety settings
Safety settings for solar control.
INFO
Allocation of a relay switch output
Allocation of a relay switch output
Eco mode can only be activated if you have allocated a
Eco mode can only be activated if you have allocated a
relay switch output to it beforehand.
relay switch output to it beforehand.
30.1.1
Programmable timer
rogrammable timer
This menu provides 6 programmable time intervals
This menu provides 6 programmable time intervals for eco mode.
Eco mode is activated during the programmed
Eco mode is activated during the programmed times; normal mode is
activated outside of the programmed times.
activated outside of the programmed times.
Programming here is identical to programming the timers for the
Programming here is identical to programming the timers for the
universal switch outputs, see
universal switch outputs, see Universal switch outputs,
Programmable timer.
®
On
Off
Off
On
66
Advertisement
Table of Contents
