Table of Contents
Advertisement
14
Temperature measurement
14
Temperature measurement
14.1
Overview
®
PoolManager
has a total of three temperature measurement inputs. A
has a total of three temperature measurement inputs. A
temperature sensor can be connected to each of them. The three
temperature sensor can be connected to each of them. The three
inputs are marked Temp.1 (T1), Temp.2 (T2), and Temp.3 (T3).
Temp.1 (T1), Temp.2 (T2), and Temp.3 (T3).
The temperature sensor for the measurement water is connected to
The temperature sensor for the measurement water is connected to
T1 in the default setting.
14.2
Measurement water temperature
Measurement water temperature
PoolManager
®
measures the temperature of the measurement water
measures the temperature of the measurement water
flowing through the measurement chamber. To that end, a PT1000
flowing through the measurement chamber. To that end, a PT1000
temperature sensor is integrated into the measurement chamber and
temperature sensor is integrated into the measurement chamber and
connected to the input Temp. 1 (T1).
For PoolManager
®
O2, temperature measur
O2, temperature measurement for calculating
temperature compensation is used (see section Automatic O2
temperature compensation is used (see section Automatic O2
(BayroSoft) dosage).
14.3
Measured temperatures
Various functions and sensor types can be allocated to all three
Various functions and sensor types can be allocated to all three
temperature inputs. Allocation is realised in the following menu:
temperature inputs. Allocation is realised in the following menu:
Configuration Temperature
The following functions can be assigned to each individual
The following functions can be assigned to each individual
temperature input:
Measurement water
•
Temperature of measurement water The integrated standard
Temperature of measurement water The integrated standard
measurement water sensor in the measurement chamber is
measurement water sensor in the measurement chamber is
connected to input Temp. 1 (T1) in the default
mp. 1 (T1) in the default state.
Pool water
•
Temperature of the pool water (measurement in circulation circuit)
Temperature of the pool water (measurement in circulation circuit)
Solar
•
Water temperature in the solar collector
Air (indoor hall)
•
Air temperature in the indoor hall
Air (outside temperature)
•
Outside air temperature
14.4
Sensor types
Furthermore, the sensor type used can be configured for each
Furthermore, the sensor type used can be configured for each
temperature input:
PT1000 (standard)
•
This is the standard measurement water sensor
This is the standard measurement water sensor
used in the measurement chamber.
KTY83
•
This model was used in earlier BAYROL devices
This model was used in earlier BAYROL devices
KTY16-6 (2k parallel)
•
This model was also common in the swimming pool industry
This model was also common in the swimming pool industry
IMPORTANT NOTICE!
KTY16-6 temperature sensor
When using a KTY16-6 sensor, a
be connected parallel to it in order to match the sensor
be connected parallel to it in order to match the sensor
to the measurement range of the two other sensor
models.
6 sensor, a 2k resistor has to
ange of the two other sensor
User Manual PoolManager
14.5
Display in home view
Display in home view
Pos. Content
Notes
Notes
1
Current measured
0.0...50.0 °C (input T3: 0.0...75.0 °C)
0.0...50.0 °C (input T3: 0.0...75.0 °C)
value
Colour of measured value display:
Colour of measured value display:
green
green
everything OK
everything OK
yellow
yellow
or start delay
red
2
Measured value scale Graphic display of current measured value
Graphic display of current measured value
and alarm thresholds.
and alarm thresholds.
3a
LED symbol
The LED symbol is only displayed when the
The LED symbol is only displayed when the
supplemental heating function is being used.
supplemental
It illuminates when the heating system is
It illuminates when the heating system is
active, i.e. when heating is on.
ctive, i.e. when heating is on.
3b
Status of heating
This status is only displayed when the
This status is only displayed when the
and/or solar heating
supplemental
supplemental heating or solar heating
function is being used.
function is being used.
For details, please review the section Heater.
For details, please review the section
4
Alarms
All active alarms are shown regarding
All active alarms are shown regarding
temperature measurement.
temperature measurement.
Alarms whose cause has already been
Alarms whose cause has already been
remediated disappear from the display, even
remediated disappear from the display, even
if they have not been acknowledged.
if they have not been acknowledged.
If there is no active alarm, "OK" appears.
If there is no active alarm, "OK" appears.
14.6
Configuration temperature
Configuration temperature
Configuration of temperature measurement is performed in the menu:
uration of temperature measurement is performed in the menu:
Configuration Temperature
Configuration Temperature
There, the following parameters can be configured:
There, the following parameters can be configured:
Parameter
Setting range
Setting range
Top alarm threshold
0.0...50.0°C
0.0...50.0°C
T1 / T2 / T3
(T3 0.0...75.0°C)
0.0...75.0°C)
Bottom alarm threshold
0.0...50.0°C
0.0...50.0°C
T1 / T2 / T3
(T3 0.0...75.0°C)
(T3 0.0...75.0°C)
Sub-menu
Configuration of functions and sensor types for
Configuration of functions and sensor types for
Configuration of
T1 / T2 / T3, see section
T1 / T2 / T3, see section
temperature sensors
Temperature sensors
Temperature sensors
®
Normal operation,
Flow signal missing
start delay
Alarm
Standard setting,
default set Europe
10.0°C
50.0°C
41
Advertisement
Table of Contents
