Main Menu (Icon Menu) - Bayrol PoolManager Series User Manual

8
Display and operation - Graphical user interface Graphical user interface
Operating mode and/or operating status
Auto Measurement, control, and dosage run Measurement, control, and dosage run
in automatic mode
Manual Manual dosage is running
Off Control is turned off
Alarm Dosage is blocked by an alarm
Flow Dosage is blocked because there is no flow signal present Dosage is blocked because there is no flow signal present
Level Dosage is blocked by a level alarm Dosage is blocked by a level alarm
Delay Dosage is blocked because start delay is running Dosage is blocked because start delay is running
Dosage PoolManager O2 (BayroSoft) only: O2 (BayroSoft) only:
®
Automatic dosage is running
The corresponding field for temperature measurement shows the corresponding field for temperature measurement shows the
operating state for heating and/or solar heating if these supplemental operating state for heating and/or solar heating if these supplemental
functions are being used
3 Alarms
Active alarm for the corresponding module displayed and/or 'OK' Active alarm for the corresponding module displayed and/or 'OK'
displayed if there are no alarms.
4 Add-on functions
In the supplemental functions area in the home view, the most In the supplemental functions area in the home view, the most
important information for all current active supplemental functions is important information for all current active supplemental functions is
shown. The content of this area is adjusted automatically such that all shown. The content of this area is adjusted automatically such that all
active supplemental functions can be seen (max. of 8). unctions can be seen (max. of 8).
1 Symbol for current operating mode
Timer operation
Function turned off
Function turned on
2 LED displays whether the supplemental function is currently LED displays whether the supplemental function is currently
turned on
3 Name of the supplemental function and, if Name of the supplemental function and, if applicable, further
information on current operating status
NOTE
No touch operation in home view No touch operation in home view
In order to avoid accidental erroneous commands, In order to avoid accidental erroneous commands,
home view does not react to taps on the touchscreen. home view does not react to taps on the touchscreen.
To configure settings or to move to other menus, first To configure settings or to move to other menus, first
use the hotkey to call up the main menu. use the hotkey to call up the main menu.
8.1.2

Main menu (icon menu)

The main menu can be called up at any time using the menu hotkey. It The main menu can be called up at any time using the menu hotkey. It
facilitates direct access to all important system functions. facilitates direct access to all important system functions.
Every function is represented by an icon with supplemental text Every function is represented by an icon with
(The icons shown depend on the corresponding device type). (The icons shown depend on the corresponding device type).
User Manual PoolManager ®
Measurement Graph Measurement Graph
Display of graphic measurement progression Display of graphic measurement progression
Alarm Overview verview
Display and acknowledgement of alarms Display and acknowledgement of alarms
Alarm Settings
Settings for alarms and their signalisation Settings for alarms and their
Service Messages essages
Display and acknowledgement of service information Display and acknowledgement of service information
(e.g. notification when electrode replacement (e.g. notification when electrode replacement
needed)
Eventlog
Display of important events and incidents Display of important events and incidents
14