Table of Contents
Advertisement
15
Manual dosing
14.7
Calibration
Calibration of temperature measurement is performed in the menu:
Calibration of temperature measurement is performed in the menu:
Calibration Temperature
Please perform calibration as follows:
1.
Select the temperature input to be calibrated
Select the temperature input to be calibrated
1-point Calibration Temperature T1 / T2 / T3
2.
Measure the corresponding temperature (water, solar, air) for
the corresponding input on the thermometer
the corresponding input on the thermometer
3.
Enter the temperature measured as the calibration value
Enter the temperature measured as the calibration value
4.
If the displayed measured value signal is stable and is no longer
If the displayed measured value signal is stable and is no longer
changing in a relevant manner, then confirm calibration by
changing in a relevant manner, then confirm calibration
pressing continue.
5.
Check the calibration results displayed and close calibration by
Check the calibration results displayed and close calibration by
pressing finished.
15
Manual dosing
15.1
Overview
For each module pH, chlorine (Cl) / Bromine (Br), mV (redox), and O2,
For each module pH, chlorine (Cl) / Bromine (Br), mV (redox), and O2,
there is the option of adding additional product to the swimming pool
there is the option of adding additional product to the
water via manual dosing.
Manual dosing is restricted in time and will automatically end after the
Manual dosing is restricted in time and will automatically end after the
dosing duration has selected has passed. Furthermore, manual dosing
dosing duration has selected has passed. Furthermore, manual dosing
can be manually stopped at any time. During manual dosing, the
can be manually stopped at any time. During manual dosing, the
dosage pump runs continuously, i.e. at a dosing output of 100%.
uns continuously, i.e. at a dosing output of 100%.
Manual dosing can be blocked by alarms; see section
Manual dosing can be blocked by alarms; see section Blocking via
alarms.
15.2
Menu manual dosing
Manual dosing can be started in the following menus:
Manual dosing can be started in the following menus:
Manual dosing pH
Manual dosing chlorine(Cl) / bromine(Br)
Manual dosing chlorine(Cl) / bromine(Br)
Manual dosing mV (Cl) / manual dosing mV (Br)
Manual dosing mV (Cl) / manual dosing mV (Br)
Manual dosing O2
The following displays and settings are available in each menu:
The following displays and settings are available in each menu:
Parameter
Setting range
Current
Display of current measured value for orientation
Display of current measured value for orientation
measured value
pH / mV
Manual dosing
D- / D+
direction
Dosage direction in manual dosing can only be selected
Dosage direction in manual dosing can only be selected
for pH if pH control is working bi-directionally. In mono-
for pH if pH control is working bi
direction dosage, manual dosing always occurs in the
direction indicated.
Hose config.
0.9 l/h / 3l/h / ...
pH / mV / O2
Here, the dosing output of the corresponding
Here, the dosing output of the corresponding
dosage pump is entered. This setting
dosage pump is entered. This setting
absolutely must coincide with the actual
pump output on the dosage pump being
pump output on the dosage
used. Otherwise, PoolManager
used. Otherwise, PoolManager
calculate the requisite pump runtime correctly
calculate the requisite pump runtime correctly
for manual dosing, and under certain
for manual dosing, and under certain
circumstances the desired amount may not
circumstances the desired amount may not
T1 / T2 / T3
temperature (water, solar, air) for
Standard setting
Standard setting
Default set Europe
Default set Europe
pH:
pH:
D-
Cl / mV:
Cl / mV:
D+
dosing always occurs in the
pH / Cl / mV: 1.5 l/h
pH / Cl / mV: 1.5 l/h
O2: 3 l/h
O2: 3 l/h
must coincide with the actual
®
may not
User Manual PoolManager
be dosed!
be dosed!
Manual dosing
0.1...10.0 l
amount
Here, the desired dosing amount is set for manual dosing.
Here, the desired dosing amount is set for manual dosing.
PoolManager
®
based on the dosing amount and hose configuration.
based on the dosing amount and hose configuration.
Example:
For a hose configuration with 1.5 l/h and a dosing amount
For a hose configuration with 1.5 l/h and a
of 1.0 l, a manual dosing duration of 40 min. is yielded.
of 1.0 l, a manual dosing duration of 40 min. is yielded.
Manual dosing
1...240 min
duration
Here, the duration of manual dosing can be established. If
Here, the duration of manual dosing can be established. If
this setting is changed, then PoolManager
this setting is changed, then PoolManager
recalculates the dosing amount
recalculates the dosing amount using the hose
configuration.
Example:
For a hose configuration of 1.5 l/h and a manual dosing
For a hose configuration of 1.5 l/h and a manual dosing
duration of 30 min, a dosing amount of 0.75 l is yielded.
duration of 30 min, a dosing amount of 0.75 l is yielded.
Pressing the button start manual dosing
start manual dosing will start dosage.
Note:
In addition to manual addition of the desired dosing amount, it is also
In addition to manual addition of t
possible to select a volume of single, double, or triple the base dosing
possible to select a volume of single, double, or triple the base dosing
amount with O2 (BayroSoft) manual dosing.
amount with O2 (BayroSoft) manual dosing.
Ongoing dosing
Menu view changes during ongoing dosage. All relevant data for the
Menu view changes during ongoing dosage. All relevant data for the
ongoing dosage are now shown:
Current value pH / mV
•
Remaining dosing time [min]
Remaining dosing time [min]
•
Dosed amount [l]
•
Dosing rate [%]
•
The only values that can appear here are 0% or 100%. If a
The only values that can appear here are 0% or 100%. If a
dosing output of 0% is shown, then manual dosing is blocked by
dosing output of 0% is shown, then manual dosing is blocked by
an alarm.
Dosing direction
•
The current status of the corresponding dosage pump. If "pump
status of the corresponding dosage pump. If "pump
off" is shown, then manual dosing is blocked by an alarm.
off" is shown, then manual dosing is blocked by an alarm.
Operating mode pH / mV / O2 (manual / flow / alarm)
Operating mode pH / mV / O2 (manual / flow / alarm)
•
If dosing is running, then PoolManager
If dosing is running, then PoolManager
"manual."
If, instead of this, "alarm" or "flow" is displayed, then manual
"alarm" or "flow" is displayed, then manual
dosing is blocked by an alarm or due to there being no flow signal.
dosing is blocked by an alarm or due to there being no flow signal.
Manual dosing can be stopped at any time by pressing the button
can be stopped at any time by pressing the button Stop
Manual Dosing.
15.3
Blocking via alarms
Just like normal automatic dosing, manua
Just like normal automatic dosing, manual dosing can be blocked by
the following alarm statuses:
Flow signal missing
•
Level alarm
•
(Depending on the configuration in the menu alarm settings)
(Depending on the configuration in the menu
Upper alarm
•
(blocks only manual dosing in D+ dosage direction)
(blocks only manual dosing in D+ dosage direction)
Lower alarm
•
(blocks only manual dosing in D
(blocks only manual dosing in D- dosage direction)
After the end of an alarm status, the block on manual dosing is
After the end of an alarm status, the block on manual dosing is
released and the remaining amount is dosed.
released and the remaining amount is dosed.
If manual dosing is started during start delay, then the start delay will
If manual dosing is started during start delay, then the start delay will
end prematurely.
®
1.0 l
calculates the duration of manual dosing
calculates the duration of manual dosing
40 min
also
®
®
is in the operating mode
42
Advertisement
Table of Contents
