Samsung DVM PLUS III Technical Data Book page 646

05-3_control systems(082~141)
Control Systems
3 Integrated management system
3
3-2. S-NET3 (MST-P3P)
(2) Detailed S-NET3 function description
Monitoring
Monitor the operation status of max.16 DMS units, and max. 4,096 indoor units.
•
Monitor the status of indoor/outdoor units, controllers connected to S-NET3.
•
• Monitor the power consumption and usage time of the indoor/outdoor units connected to S-NET3.
• Monitor the power consumption of indoor units.
➊
Operation status monitoring
• Able to monitor the indoor unit's operation status, current temperature, setting temperature,
operation mode, restriction on remote control use.
• Operation color.
Blue
Able to monitor the operation status, mode, fan speed of the ERV.
•
Able to monitor max. 4,096 indoor units and ERVs.
•
Able to adjust the installation structure to the convenience of administrators with its structure edit
•
function. (by floor, by name, etc.)
❷
Indoor/Outdoor units' cycle data monitoring
Able to refer to the status of indoor/outdoor units, and controllers.
•
Able to refer to the cycle data of the indoor/outdoor units.
•
(Compressor status, high pressure, low pressure, discharge temperature, etc.)
Able to check the program version of the indoor/outdoor units, controllers.
•
❸
Power consumption and usage time monitoring
Able to refer to power consumption of each indoor unit and group.
•
Able to refer to the power consumption by grouping indoor units to be managed together with the
•
power structure edit.
Able to refer to indoor unit usage time by date and period as well as the use ratio.
•
Able to refer to sectional power consumption by dividing power distribution sections into three.
•
(requires default setting)
V-114
3/6/08 14:04 Page 114
Gray Black
Filter
On Off
replacement
Yellow Purple
Defrost Network
operation error
Red
Error