Samsung DVM PLUS III Technical Data Book page 598

05-2_control systems(046~081)
Control Systems
2 Centralized control system
2
2-3. Function controller (MCM-A100)
3) Explanation of part names
No.
1
Error indicator
2
Defrost indicator
3
Operation mode indicator
4 Centralized control
Fan speed indicator
5
6 Air flow direction indicator
7 Operation LED
8
On/Off button
9 Fan speed button
10
Air flow direction button
Filter reset button
11
12
Operation mode button
13
Error check button
14 Indoor unit selection button
15
Temperature set button
16 Filter replacement indicator
17 Test run indicator
Set temperature display
18
Indoor unit RMC address
19
V-66
3/6/08 14:02 Page 66
1 2
19
18
17
16
15
14
13
Name
It is displayed when errors occurred in indoor/outdoor units.
Certain indoor unit enters Defrosting operation mode.
Indoor unit operation mode. Auto, Cooling, Dehumidify, Fan, Heating.
It indicates that certain indoor unit is not controlled by wired/wireless controllers.
It indicates indoor unit fan speed.
It indicates indoor unit airflow direction.
It indicates indoor unit operation. It also flickers during initial tracking process.
Indoor unit can be turned On/Off.
Indoor unit fan speed can be selected.
Indoor unit airflow direction can be selected.
When filter replacement indicator is ON, press the filter reset button to clear
filter indication.
Indoor unit operation mode can be selected.
When error indicator is displayed, press this button to check the error code.
Press Up/Down button to select the indoor unit.
Press this button to set temperature.
This warning is displayed when filter replacement is required.
No function
It displays the current set temperature. When errors occur, equivalent error code
is also displayed.
RMC address of the selected indoor unit is displayed. When an error occurred,
it shows the RMC address of the indoor unit where the error occurred.
3
Description
4
5
6
7
8
9
10
11
12