Samsung DVM PLUS III Technical Data Book page 645

05-3_control systems(082~141)
2) Function
(1) S-NET3 function description
Control & Monitoring
Schedule
Usage time and power
Statistics and analysis
System management
3/6/08 14:04 Page 113
View the management structure
View the installation structure
Indoor unit/ERV control
Indoor unit/ERV monitoring
View outdoor unit
View DMS
Create new schedule
View schedule
Start/Stop schedule
Store/Call schedule
View daily schedule
Set common exception date
Usage time and power
Power consumption report
Power distribution management
group edition
Set the electricity rate section
Indoor unit status
Usage time and power
Indoor unit usage
Set environment
Set DMS
Refer event log
Renew installed device information
DMS backup/restore
S-NET3 backup/restore
Control and monitor the indoor units (max. 4,096 units).
Check and refer the state of various devices such as indoor/outdoor
units, centralized controller, and I/M.
Set the operation mode, temperature, fan speed, and fan
direction of indoor unit/ERV.
Monitor the status of indoor unit/ERV.
Check the outdoor unit's cycle data and the cycle data of the
linked indoor units.
Check the status data of the control unit linked to DMS.
Set new schedule.
Check the schedule of the selected indoor unit.
Start/Stop schedule application.
Store/Call a prepared schedule.
Confirm each schedule by date.
Set the date which schedule operation is not applied on.
Check the usage time and power for total, group, and individual
indoor units.
For preparing the report on the power consumption by each indoor
unit for the period set.
Edit an indoor unit's power management structure
Set up to 3 sections for electricity billing management.
Check the status of indoor unit operation / temperature setting
per period.
Check the usage time and power for total, group, and individual
indoor units.
The usage ratio of all indoor units for a specific period.
Set the environment related to S-NET3
(password, language, temperature unit).
Set the DMS to connect with S-NET3.
Refer the warning, error, data of indoor units.
Modify S-NET3 data if installation data has been changed.
Backup the data of DMS connected to S-NET3.
Backup the data of S-NET3.
V-113