Samsung DVM PLUS III Technical Data Book page 624

05-3_control systems(082~141)
Control Systems
3 Integrated management system
3
3-1. DMS (Data Management Server)
(11) Access to DMS
➊
Use the cross-type LAN cable to make direct connection with an operating PC and the DMS.
Cross LAN cable
Pin assignment of the LAN cable
1. Striped orange
2. Orange
3. Striped green
4. Blue
5. Striped blue
6. Green
7. Striped brown
8. Brown
1
❷
Before accessing the DMS, check network configuration of the PC. Default IP of the DMS is set to 192.168.0.2.
❸
JRE (Java Runtime Environment) of version 1.3.1 or later must be installed in the PC to decode web pages from the DMS
web server. Without the JRE engine, no control and state monitoring are activated.
❹
Open the web browser and type 192.168.0.2 on the Address window. Enter the ID and password like following.
V-92
3/6/08 14:04 Page 92
1. Striped green
2. Green
3. Striped orange
4. Blue
5. Striped blue
6. Orange
7. Striped brown
8. Brown
8 1 8
Cross LAN cable
Direct LAN cable
HUB
1. Striped orange
2. Orange
3. Striped green
4. Blue
5. Striped blue
6. Green
7. Striped brown
8. Brown
1 8
Direct LAN cable
Set to 192.168.0.xxx. xxx can be assigned to
any number between 3 to 254.
Set to 255.255.255.0
No need to set under the direct connection environment
Type 192.168.0.2
Type the following for the ID and password
ID : admin
PASS : 1234
1. Striped orange
2. Orange
3. Striped green
4. Blue
5. Striped blue
6. Green
7. Striped brown
8. Brown
1 8