Product Specification - Samsung DVM PLUS III Technical Data Book

05-2_control systems(046~081)
Control Systems
2 Centralized control system
2
2-5. S-NET II Plus (MST-S1P)

(3) Product specification

Item
PC
OS
Display
(4) Check up details before installation
Check if centralized controller operates normally.
• Check if the communication between centralized controller and interface module is normal.
• If there is any communication error between centralized controller and I/M, it does not operate in S-NET II Plus.
• When centralized controller MCM-A202A is in use, set the option switch K4 to ON.
• When an option switch for centralized controller is not set, centralized controller displays an error
(S-NET II Plus : 2400bps, Centralized controller: 9600bps).
Check if the Serial port operates without a problem.
• Check the Ports at My computer
V-74
3/6/08 14:02 Page 74
Model
CPU Pentium III 500MHz or above
Memory More than 512MB
Network 10/100M Ethernet
Windows NT, Window 2000, Windows XP
❈ It may not operate in Windows 95, 98, ME.
More than 1024 x 768
Set an option switch if MCM-A202A centralized controller is put to use.
N N N N o o o o t t t t e e e e
S-NET II Plus is not supported when MCM-A202A is connected to the
interface module, MIM-B13A.
Rotational flash
➔
Hardware
Details
Set the No. 4 Switch to ON.
➔
Device Manager.
S-NET II Plus supports the serial port COM1, 2, 3 and 4 only