Security - DFI SU256-SCM User Manual

PC Health Status
This section displays the PC health status.
InsydeH2O Setup Utility
Advanced
PC Health Status
Voltage
0.864 V
VCORE
5.017 V
5V
+12V 11.968 V
VDDQ 1.200 V
3.168 V
VBAT
3.344 V
3VSB
Temperature
System ( C/ F) 38.5 C/ 101.3 F
o o
45.5 C/ 113.9 F
CPU ( o C/ o F)
Fan Speed
CPU FAN 0 RPM
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit


Security

Main Advanced Security
Current TPM Device <TPM 2.0 (DTPM)>
TPM State All Hierarchies Enabled, Owned
TPM Availability <Available>
TPM Operation <No Operation>
Supervisor Password Not installed
Set Supervisor Password
Power on Password <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation No changes to current state.
Enable Enable and activate TPM.
Set Supervisor Password
Set the supervisor's password and the length of the password must be greater than
one character.
Power on Password
Disable Input of password is required when accessing the BIOS Setup Utility.
Enable Input of password is required during Power-on Self-test (POST).
29 29
InsydeH2O Setup Utility Rev. 5.0
Boot Exit
When Hidden, don't ex-
poses TPM to 0
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com www.dfi.com