DFI SU256-SCM User Manual page 27

Active Management Technology Support
The section allows users to enable or disable the Intel
AMT). Please refer to Chapter 6 for more information.
InsydeH2O Setup Utility
Advanced
Active Management Technology Support
Intel AMT Support <Disabled>
Un-Configure ME <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Intel AMT Support
This field is used to enable or disable Intel
Un-Configure ME
This field is used to enable or disable to un-configure ME with resetting MEBX pass-
word to default.
MEBX Configuration
Configure Intel Active Management Technology (Intel
®
BIOS Extension (MEBX) section. Please refer to Chapter 6 for more information.
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
® Active Management Technology (Intel
Rev. 5.0
Enable/Disable Intel(R)
Active Managment Tech-
nology BIOS Extension.
Note: iAMT H/W is al-
ways enabled. This Option
Just controls the BIOS
extension execution.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Active Management Technology.
®
AMT) in the Intel Management Engine
® ®
Chapter 3
UEFI Device Manager
® Press Enter and a prompt will show up. Press Enter again to exit BIOS and enter the setup
page of Device Manager. To return to BIOS, please Esc to restart the system.
Advanced
UEFI Device Manager
UDFI Device Manager
Exit BIOS Setup Utility and launch Device Manager !!
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Device List
F1 Help
Esc Exit
27 27
InsydeH2O Setup Utility Rev. 5.0
Device Manager setting
[OK]
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Device Manager
↑/↓ Select Item
Enter Select SubMenu

www.dfi.com www.dfi.com