Front Panel Connector - DFI SU256-SCM User Manual

Front Panel Connector

Front
Panel
Chapter 2 Hardware Installation
1 2
Power-LED
PWR-BTN
SUS-LED
RESET-SW
HDD-LED
5 6
Chapter 2
HDD-LED - HDD LED
This LED will be lit when the hard drive is being accessed.
RESET-SW - Reset Switch
This switch allows you to reboot without having to power off the system.
PWR-BTN - Power Switch
This switch is used to power on or off the system.
PWR-LED - Power LED
When the system's power is on, this LED will be lit.
SUS-LED - Suspend Mode LED
When the system is in the S1 (POS - Power On Suspend) state, it will blink every second.
When the system is in the S3 (STR - Suspend To RAM) state, it will blink every 4 seconds.
Pin Pin Assignment
3
HDD-LED
6
3
RESET-SW
5
18
Pin Pin Assignment
GND 1 Power Button
PWR-BTN
3 GND
HD LED
GND 2 Power LED
PWR-LED
Signal 3
GND
3 GND
SUS-LED
4
SUS LED
www.dfi .com