DFI SU256-SCM User Manual page 28

SIO NUVOTON6102D
This section configures the system super I/O chip parameters.
InsydeH2O Setup Utility
Advanced
CPU Smart Fan Control <Enable>
Boundary 1 [30]
Boundary 2 [40]
Boundary 3 [50]
Boundary 4 [60]
Fan Speed Count 1 [30]
Fan Speed Count 2 [40]
Fan Speed Count 3 [50]
Fan Speed Count 4 [75]
WDT <Disable>
AC Power Loss <Always Off>
PC Health Status

F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
CPU Smart Fan Control
Enable or disable the CPU smart fan.
appear for configuration.
InsydeH2O Setup Utility
Advanced
CPU Smart Fan Control <Disable>
Fix Fan Speed Count [50]
WDT <Disable>
AC Power Loss <Always Off>
PC Health Status

F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
Rev. 5.0
Enable/Disable Smart Fan
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

When disabled, Fix Fan Speed Count field will
Rev. 5.0
F a n S p e e d s e t f r o m
1-100%
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Fix Fan Speed Count
Set the fix fan speed. The range is from 1-100% (full speed).
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed. The range is from 0-127
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 1-100% (full speed).
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 to 255 seconds.
AC Power Loss
Set the AC power loss to always off or always on.
28 28
o
C.
www.dfi.com www.dfi.com