DFI SU256-SCM User Manual page 26

InsydeH2O Setup Utility
Advanced
PCI Express Root Port 8 <Enabled>
PCIe Speed <AUTO>
Hot Plug <Disabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
PCI Express Root Port 8
This field is used to enable or disable the PCI Express Root Port for the Mini PCIe Slot-
1 that can also be configured as mSATA.
PCIe Speed
Select the speed of the PCI Express Root Port: Auto, Gen1, Gen2 or Gen3.
Hot Plug
This field is used to enable or disable hot plug of the Mini PCIe port.
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Control the PCI Express
Root Port.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

ME Configuration
This section configures settings relevant to flash ME region.
Advanced
ME Configuration
Me Fw Image Re-Flash <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
26 26
InsydeH2O Setup Utility Rev. 5.0
Enable/disable to flash ME
region
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com www.dfi.com