Address Space - Siemens SIMATIC S7-1500 Manual

Configuring/address space
4.2 Position input for ""Motion Control"" technology object
Parameter
Reference speed
Enable diagnostic interrupt on
wire break
Enable additional diagnostic
interrupts
STEP 7 (TIA Portal) V15.1 or higher
1
Explanation of parameters
You can find a detailed description of the parameters in function manual Counting,
Measurement and Position Detection, section Module parameters (position input for Motion
Control) available for download on the Internet
(http://support.automation.siemens.com/WW/view/en/59709820).
4.2.3

Address space

Address space of the technology module
Table 4- 9
Size per channel
Total size
50
Value range
6.00...210000.00 U/min
Deactivated
•
Activated
•
Deactivated
•
Activated
•
Size of input and output addresses of the TM PosInput 2 with position input for "Motion
Control" technology object
Inputs
16 bytes
32 bytes
Default setting
3000.00 U/min
Deactivated
Deactivated
Outputs
4 bytes
8 bytes
Technology module TM PosInput 2 (6ES7551-1AB00-0AB0)
Manual, 06/2018, A5E03982218-AB
Scope
HSP for STEP 7
(TIA Portal)
Channel
Channel
Channel