Configuring/address space
4.3 Manual operation (without technology object)
4.3
Manual operation (without technology object)
4.3.1
Configuring
Introduction
You configure the technology module and assign its parameters with the configuration
software.
The functions of the technology module are controlled and checked by the user program via
the control and feedback interface.
System environment
The technology module can be used in the following system environments:
Applications
Components required
Central operation
•
with an S7-1500 CPU
•
Distributed operation
•
with an S7-1500 CPU
•
•
Distributed operation
•
with an S7-300/400
CPU
•
•
Distributed operation
•
with an S7-1200 CPU
•
•
Distributed operation
•
in a third-party sys-
•
tem
•
52
S7-1500 automation system
TM PosInput 2
S7-1500 automation system
ET 200MP distributed I/O
system
TM PosInput 2
S7-300/400 or S7-1200 auto-
mation system
ET 200MP distributed I/O
system
TM PosInput 2
S7-300/400 or S7-1200 auto-
mation system
ET 200MP distributed I/O
system
TM PosInput 2
Third-party automation system
ET 200MP distributed I/O
system
TM PosInput 2
Configuration software
STEP 7 (TIA Portal):
Device configuration and
•
parameter setting with hard-
ware configuration
STEP 7 (TIA Portal):
Device configuration and
•
parameter setting with hard-
ware configuration
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7:
Device configuration and parame-
ter setting with GSD file
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
Third-party configuration soft-
ware:
Device configuration and parame-
ter setting with GSD file
Technology module TM PosInput 2 (6ES7551-1AB00-0AB0)
In the user program
Direct access to control
and feedback interface in
the I/O data
Manual, 06/2018, A5E03982218-AB