ABB Zenith ZTG 30 Operation, Maintenance And Installation Manual page 71

5.6.3.3 Access from the display /
Ekip Com DeviceNet –module
With modules connected and energized,
the presence of the modules on the mod-
ule slot activates additional menus on
the display.
The following table illustrates the path for
accessing the configuration parameters
of the modules from the display:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com DeviceNet
MAC address
Baudrate
:
—
Table 5.13 The path for accessing the configuration parameters of the Ekip Com DeviceNet -module from the display
The following table illustrates the path
from the display for accessing informa-
tion on the module:
About
:
Modules (Optional modules)
Ekip Com DeviceNet
SN
Version
:
—
Table 5.14 Information of Ekip Com
DeviceNet -module in HMI
1... 63, default 63*
125 kbit/s, 250 kbit/s*, 500 kbit/s
Description
Serial number
Software version
Description
Address to be assigned to the
modules. IMPORTANT: devices
connected to the same network
must have different addresses
Data transmission speed
71