40
Z e n i t h Z T G S e r i e s AT S , O P E R AT I O N , M A I N T E N A N C E , A N D I N S TA L L AT I O N G U I D E
Description of the icons
60s
System Overview
S1 Ok
Not Ok S2
S1 Connected to Load
Override S1 Fail
—
Fig. 4.2 Location of the small icons and the alarms
The small icons in System Overview
-pages are:
On upper right corner
Indicates the amount of pages
and the page where you are at
the moment
Auxiliary voltage connected
11:06
Time
G
Generator selected, not started
G
Generator selected, started
On upper left corner
60s
Time delay, in Alarm list you can
see the name of delay at the
same time, e.g. Override S1 Fail
Alarm List
G
11:06
—
Fig. 4.3 When pressed Esc-key (1) in System
Overview -pages, the alarm list is shown.
On the lower edge of the screen you can
see the Alarms. When pressed Esc-key (1)
in System Overview -pages, the alarm list
is shown.
For more information, see chapter 6,
Troubleshooting
Alarm List
Invalid Date
Ethernet disconnected
Notice
The default values are marked in the menu
tree by *-marking.