ABB Zenith ZTG 30 Operation, Maintenance And Installation Manual page 67

5.6.2.3 Access from the display
/ Ekip Com Profibus DB -module
With modules connected and energized,
the presence of the modules on the mod-
ule slot activates additional menus on
the display.
The following table illustrates the path for
accessing the configuration parameters
of the modules from the display:
Settings (*Default value)
:
Modules (Optional modules)
Ekip Com Profibus DB
Serial address
:
—
Table 5.10 Configuration of Ekip Com Profibus DB -module in HMI
The following table illustrates the path
from the display for accessing informa-
tion on the module:
About
:
Modules (Optional modules)
Ekip Com Profibus DB -module
SN
Version
:
—
Table 5.11 Information of Ekip Com Profibus DB -module in HMI
1...125, default 125*
Description
Address to be assigned to the modules.
IMPORTANT: devices connected to the same
network must have different addresses
Description
Serial number
Software version
67