Troubleshooting; Cleaning - Silvercrest SIBT 16 A1 Operating Instructions Manual

Troubleshooting

The earbuds cannot be paired with a compatible Bluetooth
device
♦ Make sure that the Bluetooth
Bluetooth
♦ Make sure the earbuds
♦ If you use several Bluetooth
connection is disconnected. There may be a previously paired
Bluetooth
♦ Make sure that the earbuds
the Bluetooth
devices are placed between them.
You hear no sound from the earbuds
♦ The volume control of the earbuds
Increase the playback volume.

Cleaning

CAUTION
► The charging station
► Keep the charging contacts
corrosion. Dry the earbuds
contact with water.
► To avoid irreparable damage, ensure that no moisture can get
into the earbuds
ing the devices.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the devices.
│ GB │ IE │ NI
■ 20
device.
®
are turned on.
device in range.
®
device and that no obstacles or electronic
®
should not come in contact with water.
or charging station
function is activated on the
®
devices, ensure that any previous
®
are no more than 10 metres from
is set to the minimum volume.
on the earbuds
with a dry cloth after every
when you are clean-
®
dry to prevent
SIBT 16 A1