Troubleshooting - Silvercrest CASQUE AUDIO SKOG 40 A1 Operating Instructions Manual

Troubleshooting

The following table helps to identify and rectify further possible faults:
Fault
No sound.
Sound is only
coming from
one side of the
headphones.
NOTE
► If you cannot solve the problem with the solutions given above, please contact
the Service Hotline (see section Service).
SKOG 40 A1
Possible cause
The playback device is not
switched on.
The playback device has
been muted.
3
The audio cable
connected correctly.
The stereo balance control
on the playback device is
incorrectly adjusted.
3
The audio cable
connected correctly.
Remedy
Switch on the playback
device.
Unmute the playback device.
Make sure that the audio ca-
is not
3
ble is correctly connected
to the playback device.
Adjust the stereo balance
control to the setting you
desire.
Make sure that the audio ca-
is not
3
ble is correctly connected
to the playback device.
GB │ IE │
11 ■