DVD Player with
S VIDEO and Audio
Use this hookup if:
Your DVD player does not have component (YP
Disconnect all power sources before making any connections.
Use an A/V cable to connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
Use an S VIDEO cable to connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
To watch a DVD, press TV/VIDEO repeatedly to select the DVD
input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player and want to set up the TV remote control to operate it,
you must program the remote control. See "Programming the
Remote Control" on page 35.
To control DVD functions with the TV remote control, see
"Operating a DVD Player or DVD Changer" on page 37.
To easily identify equipment connected to the TV, see the
instructions for setting up Label Video Inputs on page 60.
Rear of TV
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.