SAT signals are selected by the SAT Box connected to the VIDEO
INPUT. TV signals are selected from the signal connected to the
Disconnect all power sources before making any connections.
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
Use A/V and S VIDEO cables to connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
Use a coaxial cable to connect your cable or your antenna to the TV's
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
Rear of TV
S VIDEO cable
color-coded to connectors.
Cables are often
Connect red to red,
white to white, etc.