VCR and Cable
Use this hookup if:
You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
Connect the CATV cable to the single (input) jack of the splitter.
Use a coaxial cable to connect one of the output jack of the splitter to
the TV's VHF/UHF/CABLE jack.
Use a coaxial cable to connect the splitter's other output jack to the
VCR's input jack.
Use A/V and S VIDEO cables to connect the VCR's AUDIO and
S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
If your VCR is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
Rear of TV
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
S VIDEO cable