Download  Print this page

Channels; General - Sony GRAND WEGA 2-694-282-13(1) Operating Instructions Manual

Sony lcd projection tv operating instructions.
Hide thumbs

Advertisement

Problem
Cannot raise the volume on
external speakers
No audio for HDMI

Channels

Problem
Cannot receive upper channels
(UHF) when using an antenna
Cannot receive any channels
when using cable TV
Cannot receive or select
channels

General

Problem
How to reset TV to factory
settings
How to restore Picture settings
to factory settings
How to restore Sound settings
to factory settings
Cannot cycle through the other
video equipment connected to
the TV
Cannot operate the setting
Lost password
TIMER LED on front panel is
lit
LAMP LED blinks in red
Digital cable box does not work ❏
Possible Remedies
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 53). Or, to use the TV remote control, set the Audio Out
option to Variable.
To turn on the TV speakers, set the Speaker option to On (see page 53).
Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.
Possible Remedies
Press ANT to select the VHF/UHF/CABLE input (see page 33).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 56).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 56).
Press ANT to select the CABLE input (see page 33).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in TV memory (see page 56).
Possible Remedies
Turn on the TV. While holding down the
POWER button on the TV. Release the POWER button then release the
The TV will turn itself off, then back on again with Initial Setup.
WARNING: This operation will clear all of your customized settings including
Parental Lock setting.
Select Reset setting option while in the Picture setting (see page 49).
Select Reset setting option while in the Sound setting (see page 52).
Be sure that the Label Video Inputs option is not set to Skip (see page 60).
If a setting option appears in gray, this indicates that the setting option is not available.
On the password screen (see page 57), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
When lit, indicates that the timer is set (see page 62). When the timer is set, this
LED will remain lit even when the TV is turned off.
Replace the lamp (see page 66).
If you are connecting a VCR and digital cable box using a splitter, as described on
page 26, you must use a special bi-directional splitter that is designed to work with
your digital cable box. Contact your cable provider for details.
button on the remote control, press the
M
M
button.
(Continued)
71

Advertisement

Table of Contents

   Related Manuals for Sony GRAND WEGA 2-694-282-13(1)

Comments to this Manuals

Symbols: 0
Latest comments:
  • VENI GOVENDER Aug 29, 2012 12:12:
    Please email page 66 to 68 cannot dowload