Inventory - Shop fox W1729 Owner's Manual

Model W1729 (For Machines Mfd. Since 1/12)

Inventory

The following is a description of the main components
shipped with the Model W1729. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box.Inventory.(Figure.7-9).
A. Bandsaw .....................................................1
B. Table with Insert ...........................................1
C. Miter Gauge ................................................1
D. Fence Rail (Small) .........................................1
E. Fence Rail (Large) ........................................1
F. Fence ........................................................1
G. Assembly Handle Wheel w/Cap Screw M6-1 x 20 ....1
Hardware.and.Tools
• . Main Hardware Kit (see Hardware Recognition Chart)
— Hex Head Bolt M8-1.25 x 16 ...........................4
— Spring Washer 8mm .....................................4
— Hex Wrench 5mm .......................................1
— Hex Wrench 8mm .......................................1
— Wrench 13 x 10mm .....................................1
— Table Pin ..................................................1
— Hex Head Bolt M8-1.25 x 100 .........................1
— Nut M8-1.25 .............................................1
— Flat Washer 8mm .......................................4
• Fence Hardware Kit (see Hardware Recognition Chart)
— Hex Socket Bolt M6-1 x16 .............................2
— Hex Head Bolt M6-1 x 20 ...............................2
— Handle M8-1.25 x 20 ....................................1
— Spring Washer 6mm .....................................2
— Nut M8-1.25 ..............................................1
— Flat Washer 6mm ........................................2
— Adjustment Pad M6-1 x 20 .............................1
— Hex Nut M6-1 ............................................1
A
Qty
Figure.7..Inventory components.
B
Figure.8..Table and miter gauge.
D
Figure.9..Handwheel, fence, and rails.
-13-
C
F
E
G