Identifier
Status
Removing the solid-state drive/Intel Optane
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the Intel Optane memory, see
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
Remove the
base
cover.
Identifier
Status
Procedure
1
Loosen the captive screw that secures the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the palm
rest and keyboard assembly.
2
Remove the screw that secures the solid-state drive shield/Intel Optane shield to the palm rest and keyboard assembly.
3
Slide and remove the solid-state drive/Intel Optane from the solid-state drive/Intel Optane slot.
4
Slide and remove the solid-state drive/Intel Optane from the solid-state drive/Intel Optane slot.
46
Removing the solid-state drive/Intel Optane memory module
GUID-EFFE3DA7-AFC7-4BB0-92C9-4A1B23C2F2F5
Released
Disabling Intel Optane
computer. After working inside your computer, follow the instructions in
GUID-5BAAC44D-C63C-4E84-8264-5FBA1D4F995B
Released
GUID-9ADDFE6D-8AD2-4554-BFF8-8FA7AC9995AC
Released
memory module
memory.
20
After working inside
www.dell.com/