Part 3: Upgrading And Replacing Hardware - IBM Aptiva Handbook

Upgrading and replacing hardware
This part contains information to help you add to or
change the hardware that was installed in your Aptiva
computer at the factory. It contains the following
chapters:
•
"Chapter 5: Preparing to upgrade" on
page 51
This chapter contains information to help you plan
and prepare to add or replace adapter cards, drives,
and system board components in your system unit.
•
"Chapter 6: Adding and replacing system
board components" on page 61
This chapter contains instructions for working with
the hardware components on your system board.
•
"Chapter 7: Adding and removing adapter
cards and drives" on page 73
This chapter contains instructions for working with
adapter cards and drives.
Part 3
49