Related Manuals for hilscher netTAP NT 151-RE-RE
Summary of Contents for hilscher netTAP NT 151-RE-RE
- Page 1 User manual netTAP NT 151-RE-RE Real-Time Ethernet gateway DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 2: Table Of Contents
USB interface (Mini-B USB) ................... 34 Galvanic isolation ...................... 35 Mounting of device ....................... 36 Safety messages...................... 36 Mounting device onto Top Hat Rail ................ 37 netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... - Page 3 13 Decommissioning/Disposal .................... 88 13.1 Putting the device out of operation................. 88 13.2 Disposal of waste electronic equipment................. 88 Contacts.......................... 92 netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 4: Introduction
1.1.1 Description of the contents This user manual describes hardware, technical data, installation and commissioning of the Hilscher netTAP gateway device NT 151-RE-RE for Real-Time Ethernet networks. This document also features step-by-step instructions on how to reset the netTAP device to its “factory settings” (a.k.a. “firmware recovery”) and how to use an SD memory card to copy configuration data from one device to another (a.k.a. -
Page 5: List Of Revisions
Section Device label [} page 31] revised. Section LEDs EtherNet/IP Scanner [} page 67] updated. Section LEDs EtherNet/IP Adapter [} page 69] updated. Table 1: List of revisions netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 6: Conventions In This Document
<final result> For a description of the labeling of Safety Messages, see section Labeling of safety messages [} page 23]. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 7: Reference To Hardware, Firmware, Software And Drivers
Sercos Slave 1722.122/PLS/S3S T120K0J0.NXF 1.x.x Sercos Master 1722.122/PLS/S3M T120K0I0.NXF 1.x.x Open Modbus/TCP 1722.122/PLS/OMB T120K0L0.NXF 1.x.x Table 2: Reference to firmware netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 8: Table 3: Reference To Software
Electronic Data Sheets Device 1722.122/PNS/PNM RE PNS-20151021.xml (e.g. EDS,GSD,GSDML) 1722.122/PNS/ECM \PROFINET 1722.122/PNS/S3M 1722.122/PNS/EIM 1722.122/ECS/PNS 1722.122/S3S/PNS 1722.122/EIS/PNS EtherCAT Slave 1722.122/ECS/PNS Hilscher NT 151XX ECS V4.2.X.xml Electronic Data Sheets 1722.122/ECS/PNM (e.g. EDS,GSD,GSDML) 1722.122/ECS/ECS \EtherCAT 1722.122/ECS/ECM 1722.122/ECS/S3M 1722.122/ECS/EIS 1722.122/ECS/EIM 1722.122/S3S/ECS 1722.122/EIS/ECS Sercos Slave 1722.122/S3S/PNS SDDML#v3.0#Hilscher#NT_151- Electronic Data Sheets 1722.122/S3S/PNM... -
Page 9: Table 5: Reference To Drivers
Path on Gateway Solutions DVD Installation program for setup.exe Setups & Drivers\USB Driver Windows USB drivers Table 5: Reference to drivers netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 10: Contents Of The Product Dvd
PROFIBUS to PROFINET Simple TCPIP connectivity through Modbus TCP 5.Installation Instructions Wiring and software installation instructions for standard users (PDF) netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 11: Table 6: Directory Of Gateway Solutions Dvd
SYCON.net example projects Training & Podcasts Podcasts Flash video presentations Powerpoints PowerPoint presentations Table 6: Directory of Gateway Solutions DVD netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 12: Documentation Overview
\PROFINET IO Generic Device DTM OI xx EN.pdf Devices devices Table 8: Additional documentation for NT 151-RE-RE as PROFINET IO Controller netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 13: Table 9: Additional Documentation For Nt 151-Re-Re As Profinet Io Device
EtherCAT Wiring Instructions UM xx EN.pdf EtherCAT networks Table 11: Additional documentation for NT 151-RE-RE as EtherCAT Slave netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 14: Table 12: Additional Documentation For Nt 151-Re-Re As Ethernet/Ip Scanner
Slave slave devices DTM OI xx EN.pdf Devices Table 13: Additional documentation for NT 151-RE-RE as Sercos Master netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 15: Legal Notes
The manual delivered with the product shall apply. Under no circumstances shall Hilscher Gesellschaft für Systemautomation mbH be liable for direct, indirect, ancillary or subsequent damage, or for any loss of income, which may arise after use of the information contained herein. - Page 16 Introduction 16/92 Liability disclaimer The hardware and/or software was created and tested by Hilscher Gesellschaft für Systemautomation mbH with utmost care and is made available as is. No warranty can be assumed for the performance or flawlessness of the hardware and/or software under all application conditions and scenarios and the work results achieved by the user when using the hardware and/or software.
- Page 17 Additional guarantees Although the hardware and software was developed and tested in-depth with greatest care, Hilscher Gesellschaft für Systemautomation mbH shall not assume any guarantee for the suitability thereof for any purpose that was not confirmed in writing. No guarantee can be granted whereby the...
- Page 18 The customer hereby expressly acknowledges that this document contains trade secrets, information protected by copyright and other patent and ownership privileges as well as any related rights of Hilscher Gesellschaft für Systemautomation mbH. The customer agrees to treat as confidential all of the information made available to customer by Hilscher Gesellschaft für...
-
Page 19: Registered Trademarks
10 are registered trademarks of the Microsoft Corporation. All other mentioned trademarks are property of their respective legal owners. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 20: Safety
Technical knowledge is presumed. The user has to assure that all legal regulations are obeyed. Intended use The netTAP NT 151-RE-RE device described in this manual is a communication device connecting two separate Real-Time Ethernet networks with each other. The device thus serves as a “gateway” between the two networks. -
Page 21: Safety Instructions To Avoid Personal Injury
· device. The allowed range for the supply voltage of the netTAP device is specified in section Technical data netTAP NT 151-RE-RE [} page 78]. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 22: Danger Of Unsafe System Operation
69 days. Avoid exceeding the maximum number of allowed write/delete accesses by excessive writing. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 23: Labeling Of Safety Messages
Sort of warning or principle Warning of property damage by electrostatic discharge Table 17: Safety signs in safety messages on property damage netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 24: Description
24/92 3 Description Functionality The netTAP NT 151-RE-RE device is a communication gateway connecting two separate Real-Time Ethernet networks. The two networks can be either using the same (e. g. PROFINET IO to PROFINET IO) or two different RTE network systems protocols (e. g. EtherNet/IP to PROFINET IO). - Page 25 SYCON.net configuration and diagnosis software, which is included in the scope of delivery. The netTAP NT 151-RE-RE device is equipped with a compact housing and is suitable for DIN rail mounting according to DIN EN 60715. netTAP NT 151-RE-RE | Real-Time Ethernet gateway ©...
-
Page 26: Protocol Conversions
/EIS/OMB /PLS/OMB Client T120D0L0.NXF T120F0L0.NXF T120J0L0.NXF T120H0L0.NXF T120K0L0.NXF Table 18: Available protocol conversions with article numbers and firmware names netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 27: Interfaces
Note: For the conversion of CC-Link IE Field Slave to PROFINET IO Device, Hilscher offers a separate netTAP with special hardware, i.e. the NT 151-CCIES-RE. For more information about this device, see user manual netTAP NT 151-CCIES-RE – CC-Link IE Field Slave to PROFINET IO-Device gateway, DOC180403UMxxEN. -
Page 28: Requirements
Requirements 28/92 4 Requirements Technical requirements · The netTAP NT 151-RE-RE device is to be mounted on a DIN rail according to DIN EN 60715. · A suitable external power supply is required. · The voltage to be applied must be in the allowed range 24 V ± 6 V DC. -
Page 29: Device Drawings And Connectors
NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 30: Positions Of The Interfaces And Leds
Connector for supply voltage (X1) NT 151-RE-RE front view Top view (X2) Bottom view (X3) Table 19: LEDs and interfaces NT 151-RE-RE netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 31: Device Label
Device drawings and connectors 31/92 Device label Each netTAP NT 151-RE-RE carries a device type label providing the following information: Labelling of channels and LEDs of the connectors of the primary network at X2 MAC address at X2 * Device type ID... -
Page 32: Protocol Logo And Led Label Sticker
LEDs. Figure 4: Protocol stickers netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 33: Power Supply Connector
Device drawings and connectors 33/92 Power supply connector The power supply of the netTAP NT 151-RE-RE has to be connected to pins 4 and 5 of the five-pole MINI COMBICON connector X1 (for identification, see position (21) in section Positions of the interfaces and LEDs [} page 30]) The power supply voltage must be 24 V DC ±... -
Page 34: Ethernet Connectors
USB interface (Mini-B USB) The USB interface (see position in section Positions of the interfaces and LEDs [} page 30]) is used for configuring the netTAP NT 151-RE-RE with SYCON.net (see operating instruction manual Configuration of Gateway and Proxy Devices, DOC081201OIxxEN) and for recovering the firmware (see section Using USB to recover firmware [} page 44]). -
Page 35: Galvanic Isolation
The isolated area is the gray area in the picture above. Functional earth is connected via back plane bus of the DIN top hat rail. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 36: Mounting Of Device
If the environmental temperature exceeds + 50 °C, you must allow a minimum distance of 17.5 mm between the netTAP and neighboring devices. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 37: Mounting Device Onto Top Hat Rail
Grounding is done via a grounding contact located at the backside of the device, connecting it electrically to the DIN top hat rail. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 38: Removing Device From Top Hat Rail
Ø To disengage the lock of the hook, pull down the latch with the screw driver. Ø Take the device off the top hat rail. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 39: Commissioning
In case an SD memory card containing a valid configuration is inserted into the netTAP NT 151-RE-RE while a power-on cycle is being performed, all data stored on the card will be copied to the internal load memory of the device. - Page 40 Resetting the netTAP to its factory settings by using an SD memory card (e. g. in case of a defective firmware) is described in the subsequent chapter. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 41: Firmware Recovery
Using USB and ComProX2 to reset the device to its factory settings/ recover the firmware On the other hand, if you are using the Hilscher ComProX2 tool via USB, you can directly access the file system of the netTAP and overwrite the old defective firmware file with a fresh firmware file. -
Page 42: Using An Sd Memory Card To Reset The Nettap To Its "Factory Settings
Using an SD memory card to reset the netTAP to its “factory settings” The netTAP NT 151-RE-RE can be reset to its factory settings by using the load memory image on an SD memory card. You will find the load memory image on the Gateway Solutions DVD in the Supplements &... -
Page 43: Figure 8: Insert Sd Card
SYCON.net via USB connection. Instructions for this can be found in the operating instruction manual Configuration of Gateway and Proxy Devices, DOC081201OIxxEN. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 44: Using Usb To Recover Firmware
For this, you need a USB cable with a Mini USB connector and the Hilscher ComProX2 tool, which is stored on the Gateway Solutions DVD in the Supplements &... -
Page 45: Figure 9: Comprox Start Window
Firmware recovery 45/92 Prerequisites The USB driver for Hilscher netTAP has been installed on the · configuration PC (the driver is included in the USB driver installation program stored on the Gateway Solutions DVD). The configuration PC has been connected to the netTAP device via ·... -
Page 46: Figure 10: Activate Auto Refresh Function
(e. g. PNS/PNS). Ø Click OK button. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 47: Figure 12: Contents Of The Nettap Ports Displayed In Comprox
Noting the file name makes it easier for you to identify the file later on the Gateway Solutions DVD for download. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 48: Figure 13: Format Flash Memory
Figure 14: Acknowledge formatting dialog Ê The file system is being formatted and all files in the ports are deleted. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 49: Figure 15: Formatting Finished Message
Ø In the File Explorer (left window) select PORT_0 entry. Ø Use the right mouse button to open the context menu and select Download. Figure 16: Download menu netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 50: Figure 17: Open File Dialog
Ø Select the firmware file you want to download, then click Open button. Ê The file is being downloaded: Figure 18: Download status netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 51: Figure 19: Download Finished Message
Instructions for this can be found in the operating instruction manual Configuration of Gateway and Proxy Devices, DOC081201OIxxEN. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 52: Using Sd Memory Card To Copy Configuration Data Into Spare Nettap Devices
SD memory card, FAT formatted. Note: The SD memory card is not included in the delivery of the netTAP device, but can be obtained from Hilscher, part number 1719.003. A configuration has been downloaded to the netTAP device. · The Windows PC/Notebook with SYCON.net and the netTAP device ·... -
Page 53: Step-By-Step Instructions
Ø Enter your password, then click OK. Ê SYCON.net opens with a new empty project: Figure 22: Empty project in SYCON.net netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 54: Figure 23: Add Nettap In Sycon.net
Ø In the menu, choose File > Open…to open an existing netTAP project. Ø In the Vendor tab of the Device Catalog (right window), open folder Hilscher GmbH > Gateway Stand-Alone Slave. Then select the device and drag & drop it onto the bus configuration line in the middle window. -
Page 55: Figure 24: Device Assignment 1
If you have just now created a new project, the netTAP DTM opens with the Device Assignment dialog window and immediately starts scanning for connected devices. Figure 24: Device assignment 1 netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 56: Figure 25: Device Assignment 2
Ø Select the found by checking the box in front of the device entry. Figure 26: Device assignment 3 Ø Click Apply button. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 57: Figure 27: Memory Card Management Of The Nettap Dtm
(metal contacts of card must be facing left). Figure 28: Insert SD card netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 58: Figure 29: Memory Card Management After Inserting Sd Memory Card
Ø Click Backup to copy the data stored in the internal load memory of the netTAP to the SD memory card. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 59: Figure 30: Memory Card Management After Backup To Sd Memory Card
The device automatically starts the loaded firmware and the configuration. Ø Remove the SD memory card from the netTAP device. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 60: Leds
16 Hz green) Power supply for the device is missing or hardware is defective. (off) Table 25: System LED netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 61: Apl Led
(red) · Missing configuration · Error in configuration · Internal error Table 26: APL LED netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 62: Leds Of The Real-Time Ethernet Systems
"off" for 50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 28: LED state definitions for the PROFINET IO-Controller protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 63: Leds Profinet Io Device
"off" for 50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 30: LED state definitions for the PROFINET IO-Device protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 64: Leds Ethercat Master
LED yellow This LED is not used. CH0: (17) (off) Table 31: LED states for the EtherCAT Master(V4) protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 65: Table 32: Led State Definitions For The Ethercat Master(V4) Protocol
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 32: LED state definitions for the EtherCAT Master(V4) protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 66: Leds Ethercat Slave
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 34: LED state definitions for the EtherCAT Slave protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 67: Leds Ethernet/Ip Scanner
The device is linked to the Ethernet. CH0: (16), CH1: (19) (green) The device has no link to the Ethernet. (off) netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 68: Table 36: Led State Definitions For The Ethernet/Ip Scanner Protocol
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 36: LED state definitions for the EtherNet/IP Scanner protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 69: Leds Ethernet/Ip Adapter
CH0: (16), CH1: (19) (green) CH2: (10), CH3: (13) The device has no link to the Ethernet. (off) netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 70: Table 38: Led State Definitions For The Ethernet/Ip Adapter Protocol
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity Table 38: LED state definitions for the EtherNet/IP Adapter protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 71: Leds Sercos Master
The device has no link to the Ethernet. (off) LED yellow This LED is not used. (off) Table 39: LED states for the Sercos Master protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 72: Table 40: Led State Definitions For The Sercos Master Protocol
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 40: LED state definitions for the Sercos Master protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 73: Led Sercos Slave
The device has no link to the Ethernet. (off) LED yellow This LED is not used. (off) Table 41: LED states for the Sercos Slave protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... - Page 74 "off" for 50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 42: LED state definitions for the Sercos Slave protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 75: Leds Powerlink Controlled Node
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 44: LED state definitions for the POWERLINK Controlled Node protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 76: Leds Openmodbus/Tcp (Client And Server)
"off" for 50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 46: LED state definitions for the OpenModbusTCP protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 77: Troubleshooting
See also section APL drawing: LED [} page 61]. Table 47: netTAP NT 151-RE-RE troubleshooting by LED For protocol-specific error diagnostics by LED, see section LEDs of the Real-Time Ethernet systems [} page 62]. netTAP NT 151-RE-RE | Real-Time Ethernet gateway ©... -
Page 78: Technical Data
+ 70 °C): - 20 … + 50 °C Humidity 10 ... 95 % netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... - Page 79 X2 (primary network): 2 x RJ45 X3 (secondary network): 2 x RJ45 Table 48: Technical data netTAP NT 151-RE-RE netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 80: Technical Data Of The Protocols
WriteMultiple-Record service is not supported Reference to stack version PROFINET IO Controller 2.7.x.x Table 49: Technical data PROFINET IO Controller protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 81: Profinet Io Device
Ethernet II, IEEE 802.3 PROFINET IO specification V2.2 (legacy startup) and V2.3 (but advanced startup only for RT) are supported. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... - Page 82 Reference to stack version V3.9 Table 50: Technical data PROFINET IO RT IRT Device Protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public...
-
Page 83: Ethernet/Ip Scanner
CIP Sync Services are not implemented TAGs are not supported Reference to stack version V2.8 Table 51: Technical data EtherNet/IP Scanner (Master) protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 84: Ethernet/Ip Adapter
The size of the bus configuration file is limited by the size of the FLASH disk (1 Mbyte). Reference to stack version V4.2.x.x Table 53: Technical data EtherCAT Master protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 85: Ethercat Slave
Hot-Plug not supported Cross Communication not supported Reference to stack version V2.1 Table 55: Technical daten sercos master protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 86: Sercos Slave
No acyclic user data transfer No slave-to-slave communication Reference to stack version V3.1 Table 57: Technical data POWERLINK Controlled Node (slave) protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 87: Open Modbus/Tcp
10 and 100 MBit/s Data transport layer Ethernet II, IEEE 802.3 Reference to stack version V2.6 Table 58: Technical data OpenModbus/TCP protocol netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 88: Decommissioning/Disposal
As a consumer, you are legally obliged to dispose of all waste electronic equipment according to national and local regulations. netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... -
Page 89: List Of Figures
List of figures 89/92 List of figures Figure 1: Data flow netTAP NT 151-RE-RE ................ 24 Figure 2: Outer dimensions of NT 151................. 29 Figure 3: Dimensions of Mini COMBICON power supply plug ..........29 Figure 4: Protocol stickers ....................32 Figure 5: Galvanic isolation of NT 151-RE-RE .............. -
Page 90: List Of Tables
LED states for the Sercos Master protocol ............. Table 40: LED state definitions for the Sercos Master protocol..........netTAP NT 151-RE-RE | Real-Time Ethernet gateway © Hilscher 2018 DOC150802UM04EN | Revision 4 | English | 2018-04 | Released | Public... - Page 91 LED states for the OpenModbusTCP protocol ............Table 46: LED state definitions for the OpenModbusTCP protocol ........Table 47: netTAP NT 151-RE-RE troubleshooting by LED ............ Table 48: Technical data netTAP NT 151-RE-RE ..............Table 49: Technical data PROFINET IO Controller protocol ..........
- Page 92 联系我们 广州虹科电子科技有限公司 Hongke Technology Co., Ltd www.hkaco.com 广州市黄埔区科学大道 99 号科汇金谷三街 2 号 701 室 邮编 510663 工业自动化事业部 CAN 卡 PLC+HMI OPC UA 方案 树莓派工控机 华南区&华北区 谢晓锋 电话/微信：13660244187 QQ：2916592843 邮箱：xxf@hkaco.com 华东区 许卫兵 电话/微信：15900933547 QQ：2029912093 邮箱：xwb@hkaco.com 联系我们：广州|上海|北京|西安|武汉|深圳|沈阳|成都|香港...
Need help?
Do you have a question about the netTAP NT 151-RE-RE and is the answer not in the manual?
Questions and answers