Display Symbols; Switch On - Atmos Thorax S 201 Operating Instructions Manual

4.2.2 Display symbols

Figure Function
Battery status display / charging indicator
Keylock activated
Therapy recording in progress
Therapy on hold
Therapy in progress
Upcoming warning suppressed
Safety check required

4.3 Switch on

• To switch on the ATMOS
sensor above of the symbol
• The ATMOS logo appears with the software version number
in the bottom right corner.
• After a short while the leakage test (chapter „4.4 Leakage
test" on page 22) starts automatically.
• Subsequently "Therapy progress" will appear in the display.
By pressing the buttons you can start a new therapy
V3.0.40
recording or continue recording.
• The main display appears. The device is now ready for use.
S 201 Thorax please touch the
®
for 2 seconds.
21