Oven Controls; Cooktop Safety Features; Safety Shut-Off; Overheating Protection - Miele HR 1622-2 Operating Instructions Manual

Features

Oven controls

The oven controls allow you to use the
various cooking modes to bake, roast
and broil.
It also allows you to access:
– the time of day display,
– a timer,
– a timer to automatically turn cooking
programs on and off,
– Moisture Plus cooking,
– the MasterChef programs,
– the MasterChef Plus programs,
– the creating of a Favorite program,
– settings that can be customized.

Cooktop safety features

Safety shut-off

The safety shut-off is triggered
automatically if a burner is heated for an
unusually long period of time. This time
depends on the power level selected. If
it has been exceeded, the burner
switches off and the residual heat
indicator appears. If you switch the
burner on and off again, it is ready for
operation again.

Overheating protection

All the induction coils and the cooling
elements for the electronics are
equipped with an overheating
protection mechanism. To prevent the
induction coils and cooling elements
from overheating, the overheating
protection mechanism works on the
affected burner or on the entire cooktop
in the following ways:
40
– any booster function in operation will
be turned off,
– the power level that is set will be
reduced,
– one or more burners turn off
automatically.
• Turn the knob for the affected burners
to "0". The affected burners can only be
used again once the induction coils
have cooled down to a safe level.
Overheating can be caused by:
– heating empty cookware,
– fats or oils being heated at high
power levels,
– a hot burner being turned on after a
power outage.
If, despite elimination of the cause, the
overheating protection is triggered
again, contact Miele Technical Service.

Residual heat indicator

If the switched-off burner is still hot, the
residual heat indicator appears in the
display. It only goes out when the
burners are cool enough to touch.

Pan/Pan-size sensors

The following might be the cause if the
 symbol flashes in the burner display:
– no pans present,
– cookware too small,
– unsuitable cookware.
The cookware is not detected and the
burner switches off automatically after
3 minutes.