Miele HR 1622-2 Operating Instructions Manual page 143

Problem
A noise can be heard
after the appliance is
turned off.
One or several burners
flash  in the display.
The burner knob is not
at 0; a power level is set
for the burner. The
burner is not heating
up.
 lights up or flashes
alternately with  in the
display.

flashes in the
display
alternately with
numbers.
The display is dark.
System Lock  appears
in the display when the
oven is turned on.
Frequently Asked Questions
Possible cause and solution
The fan will continue running until the cooktop has
cooled down. It will then turn itself off automatically.
The burner knob has been turned to the right or left
for more than 30 seconds.
 Turn the knob to 0. If the error message does not
go out, there is a technical fault. Contact Miele
Technical Service.
There was a power failure during operation.
The burner has been turned on for more than
3 minutes without a suitable pan on it.
The maximum operating time for the burner has been
exceeded.
 Turn the burner knob to 0.
The burner can be started up again.
There is a fault in the electronics.
 Disconnect the power supply to the cooktop for
approx. 1 minute. If the problem persists after
reconnecting the power supply, contact Miele
Technical Service.
The time of day display is deactivated. When the
appliance is turned off, the time of day display is
turned off.
 As soon as the oven is turned on, the time of day
will appear. If you want it to be displayed
continuously, the setting to turn the time of day
display back on must be changed (see "Settings –
Time of day – Display").
There is no power to the appliance.
 Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Technical Service.
The system lock  is activated.
 You can unlock the oven to start a cooking
program by pressing  for at least 6 seconds.
 To permanently deactivate the lock, see "Settings -
System Lock ".
143